Innokin iTaste VV v3.0

The microprocessor controlled iTaste VV V3.0 allows you to adjust the voltage (VV) from 3.3 volts ~ 5.0 volts and also allows you to adjust the wattage (VW) from 6.0 watts ~ 11.0 watts.

User Manual: Download the Innokin iTaste VV v3.0 User Manual

• Display: The display shows resistance in ohms, voltage, voltage output, wattage, puff count, and last-used.
• LED battery indicator displays the following information;
  • Green: Fully charged
  • Yellow: Half Charged
  • Red: Needs charging
• Size: 15mm x 15mm x 108.5mm
• Battery Capacity: 800mAh
• Charging Time: 1.5 hours
• Variable Voltage: Adjustable voltage from 3.3 volts ~ 5.0 volts in 0.1 volt increments
• Variable Wattage: Adjustable wattage from 6.0 watts ~ 11.0 watts in 0.5 watt increments
• Ohms Meter: Resistive load detection ohms meter
• Puff Counter records your actual puffs and resets puff records when the device is turned off
• Short Circuit/Atomizer Protection helps protect the iTaste VV 3.0 against faulty atomizers
• Battery voltage is monitored and automatically turned off when the battery is fully discharged
• 510 threading 
• ON/OFF switch;
  
  • Clicking three times will power the device on or off
  • Once the device is on, holding down the button will activate the battery.
  • Holding down the button for 10 seconds or longer shut off the iTaste v3.0 VV until the button is released.
  • Passthrough vape while charging technology allows you to vape while charging via the micro USB port. 
• The device remembers the last voltage or wattage used when switching batteries